Bitcoin hardware

buy bitcoin

EastShore Mining Devices

Find volmaakt bitcoin &, litecoin miners on

Search This Blog

【,Tutorial & Setting up】,110MH Scrypt ASIC Miner 110MH A2 Terminator Litecoin Miner for Scrypt Mining 110MH Asic Scrypt Miner Excellent spil Gridseed

Check our official webpagina for the newest bitcoin miner, the most updated tutorial and amazing support! 🙂

  • Connect the miner to the router by internet cord.
  • The default IP of the miner is “ ”, so, plz make sure the IP your router is “192.168.1.xx” too(eg.
  • For miner configuration, plz use the ethernet cord to connect the miner to the same router which your PC also connected. (Your PC is just needed for miner configuration)
  • Pressing the Windows key + the R key. So ‘Windows + R’. This should give you a petite window called ‘run’.
  • Inject ‘cmd‘ te the window, and klapper the come in key. This should open a fresh window.
  • Input instruction “ipconfig“, it will vertoning the details of your network.
  • Make sure the “Default Gateway” is “192.168.1.xx”.
  • If the default gateway is not “192.168.1.xx”, please switch to another router (which give a default gateway spil “192.168.1.xx”), or, switch the ip of your router to “192.168.1.xx”
  • Connect the miner to the router by internet cord.
  • Check out the default IP of the miner. About the default IP of the miner, plz see the section below.
  • Power on the miner.
  • Open configuration pagina: Open IE –>, input the default IP te the address buffet. (eg. the default IP of the miner is “105” (or “”), then input “”. plz make sure the IP of your router is “192.168.1.xx” too.).
  • If IE can’t open the address you inputted, plz just attempt a few more times. (sometimes, the miner need about 1 minute to connect itself to the router)
  • switch the configure of the miner on the configuration pagina. For the configuration option, see section Pagina> below.
  • save the switch.
  • power on again.
  • just wait for about 1

Trio minute, and the mining will commence automatically.

  • You can see the mining status on the configuration pagina.
  • Once you configured the miner, the miner will begin automatically after power on.
  • Spil the picture showcasing, the “xx” of this miner is “120”, so the default IP address of the miner is: “”.

    Sometimes, the factory may switch the IP of the miner, plz download the software “Advanced IP Scanner” to scan the IP. (download here:

    • Connect the miner to the router,
    • Power on the miner.
    • Open the IP scanning software, following pictures demonstrating how to scan all the IP ter the section “”


  • Then you can find out the IP of the miner.
    • The following picture displaying the configuration pagina:
    • Significant : After you switched any of the network setting options, please click the button NETWORK SETTING CONFIRM . Then wait a minute for the network setting be valid.
    • After you switched the network setting, plz power off the miner, then power on it again. Please input the IP address you switched(if you don’t switch the option “ IP ADDRESS ”, just input the original IP) ter the address drankbuffet and inject configuration pagina again.
    • If the network works well for you, wij don’t recommend you to switch it.
    • After you switched the mining setting(POOL 1 ADDR, POOL 1 ID, POOL 1 PWD etc.), plz click the circle after “ CGMINER Embark ” and then click the button “ CGMINER SETTING CONFIRM ”.
    • After you switched the mining setting, plz power off the miner, then power on it again. The mining will embark automatically after 1

    Trio minutes. The status will be like the following picture demonstrating.

  • If the mining does not commence, plz attempt to click: circle after “CGMINER STOP” →, button “CGMINER SETTING CONFIRM” →, circle after “CGMINER START” →, button “CGMINER SETTING CONFIRM”
  • If one of the pool settings is empty (not set), plz just keep it spil ‘,/’ (default invalid pool address and etc.)
  • Houtvezelplaat SPEED : set the option “board speed” spil “1200Mhz” can get a speed about 105
  • 115MH/s, but please pay more attention to the fever dissipation.

  • If your the mining speed of your miner get unstable after you switch the Houtvezelplaat SPEED to “1200Mhz”, please don’t worry about that, you can just attempt the following to fix the unstable hashing: 1>, switch the Houtvezelplaat SPEED to lower speed, eg. 1100Mhz, Two>, open the case of the miner, and make sure the warmth radiation works well.
  • Click on the bottom button “ REFRESH ”, check the mining geschreven status. It will be shown te the picture below:
  • For real-time mining status, plz click “REALTIME STATUS MONITOR”, the realtime mining status showcasing like this:
  • Related movie: BitCoin For Beginners – Cloud Mining & Cloud Hashing – Part Four – Free BitCoin Contest ROUND Two

    Leave a Reply

    Your email address will not be published. Required fields are marked *